Hueibin Enterprise Corp Since 1976
Building Hardware
Quality Control Systems
3C Computer Parts Made In Taiwan
Auto Parts
Machines at Hueibin Enterprise Corp Taiwan

metal stamping process

metal stamping process

Sheet metal parts are all around us: motor-parts, metal desks, LED parts, building-hardware, 3C-products, auto parts, aircraft fuselages and so on. They are lightweight, strong, and can take on complex shapes. The sheet metal stamping process is characterized by very high production rates, low labor costs, but high equipment and tooling costs Thus, this process is ideally suited for high-volume production.

The sheet metal blanks used in stamping are typically made of low-carbon steel, because of its low cost, good strength and excellent formability. The formability of various sheet metals is typically determined by marking the sheet with a grid of small circles and then stretching it over a punch. The deformation of the circle's ins measured in regions where tearing has occurred and used to construct a forming-limit diagram.

In applications where lightweight is important, aluminum, or alloys of steel with magnesium and titanium are also used, these lighter-weight materials are typically more expensive and less ductile and harder to from. Thus, developing tooling to produce defect-free parts using these lightweight materials is difficult.

A typical stamping press consists of a punch (upper of stamping mold), a stamping mold, and blank holder (binder), which holds the sheet metal in place during the punch stroke (i.e., while the punch is lowered into the stamping mold). The stroke (e.g., 50~80 mm) depends on the desired part geometry.

The stamping mold design will often include appropriately placed draw beads to help regulate the material flow into the stamping mold.

Commercial stamping operations are typically done at high pressure and high speed, thus, leading to short duration. The sheet metal material is plastically deformed, and flows into the stamping mold cavity and conforms to its shape. Proper design of the stamping mold allows complex shapes to be produced rapidly and cost effectively. Blank holder force and punch force must be properly selected to hold the sheet metal blank in place, through friction forces, while still allowing the sheet metal to plastically deform and flow into the stamping mold cavity.

Typically, stamping mold design, and selection of nominal process parameters is based on a finite element analysis (FEA). A variety of presses (e.g., mechanical or hydraulic) can be used, and nitrogen cylinders are typically placed under the stamping mold as a cushion to absorb the energy of the punch stroke and provide blank holding forces. For complex parts, a stamping line with several presses and stamping molds is used. Stamping molds can be quickly removed from the press to enable the production of a variety of different parts on the same press line. A more detailed discussion of the stamping process and equipment used.

Typical quality problems in sheet metal stamping include wrinkling (due to compressive stresses), tearing (due to tensile stresses) and spring back (due to elasticity). If the binder force is too high, locally in a particular area of the stamping mold, then the flow of material into the stamping mold is restricted and tearing is likely to occur in that region. If the binder force, again locally in a particular region, is too low then excessive material flow can lead to wrinkling. Spring-back can be accounted for in the design of the stamping mold, as well as by varying the punch force during the stroke to set the part geometry.

Mechanical presses typically allow the operator to set the desired stroke, speed, and blank holder force. The blank holder force typically cannot be adjusted around the stamping mold, and it is not possible to control the binder or punch force during the short time in which the part is formed. Hydraulic presses, depending on the design, do provide some additional flexibility in setting the blank holder and punch forces during operation. Thus, the control capabilities of stamping presses are limited, and they require significant trial and error during the stamping mold tryout process to establish the best settings for use in a production run. Furthermore, during production, factors such as blank material thickness and formability variations, and changes in lubrication, can act as disturbances and lead to quality problems

Process control for stamping

Stamping industry is a long-established, widely used industrial process for economical high-volume production. It is used extensively in the automotive industry/building hardware industry/LED parts / Motor parts/3C parts ,

As well as for production of white goods and many other products.

We would like to present an approach, based on process control, to improve stamped part quality at reduced cost by eliminating tearing, wrinkling and springback. The concept is straight-forward: measure punch forces and then adjust the blank holder forces at various locations around its periphery and at various times during the stamping process to properly control the draw-in of blank material into the die. Of course, how to do this is the challenge! We would like to show in detail how this simple goal can be achieved through real-time control technology.

A reconfigurable set of hydraulic actuators is placed under the die to enable the control of the bland holder forces at various locations around the die periphery. These blank holder forces at each actuator are varied during the short duration of the press stroke. The careful design of a controller, termed the machine controller, is needed to ensure that the desired blank bolder forces are achieved at each hydraulic actuator and at each instant in time during the press stroke. Furthermore, we also measure the punch force during stamping, and design another controller, termed the process controller, to ensure that the desired punch force values are achieved during stamping despite the presence of disturbances. Maintaining the desired punch force leads to consistent draw-in of blank material and improves stamped part quality by eliminating wrinkling, tearing and springback.

We would like to show the methods for designing these controllers, and present experimental validation results from die try-out tests, the proposed system has also been evaluated in pilot tests in production and has also been shown to improve the formability of hard-to-form materials, such as lightweight alloys.

Stanzteile

Hueibin Stanzteile aus Taiwan / Taiwan Stamping Parts

Die Hueibin Enterprise Corporation produziert seit 1976 Stanzteile, Pressteile, Umformungen und Ziehteile. Die Produkte finden Verwendung als Ersatzteile, Maßteile und Prototypen für mittelständische Unternehmen, als Zulieferer für die industrielle Großfertigung, wie auch für private Anwender. Vor allem die Serienfertigung von Rahmen und Stanztechnik für Computergehäuse und Autoteile, haben Hueibin zu einem der wichtigsten taiwanesischen Hersteller für Stanzteile gemacht.  Die Importeure der Spezialteile aus Taiwan kommen heute vorwiegend aus den USA, Europa, Japan und China.

Stanz- und Formteile vom Profi aus Taiwan

Die Hueibin Enterprise ist Experte bei der Herstellung individuell gefertigter Präzisionsteile aus Metall, für alle Arten von Maschinen und Zwecke. Die Produktpallette des Herstellers umfasst nahezu alle bekannten Arten von Stanzware und Formteilen. Im laufenden Programm finden sich Maschinenteile, Autoersatzteile, Autozubehör, OEM Parts, Computerteile und Komponenten für Elektrogeräte. Ein weiteres Betätigungsfeld sind die vor kurzem eingeführten Formteile zum Einsatz beim Einbau von LED Beleuchtung. Auch mit dem Bau von Prototypen und der Herstellung von Kleinserien, hat sich die Firma in den vergangenen Jahren einen Namen gemacht.

Stanzteile von höchster Qualität

Hueibin Taiwan steht für Qualitätsteile und hervorragenden Service.  Das Einhalten der exakten Spezifikationen und Fertigungstoleranzen ist dabei genauso wichtig wie die Möglichkeiten zu Änderungen und Optimierung in jedem Stadium. Dank kurzer Kommunikationswege und ausgezeichnet geschultem Personal, können selbst im laufenden Fertigungsprozess noch Modifikationen vorgenommen werden. Auch die Produktion von Vorserien, vor dem Beginn einer Massenfertigung, ist kostengünstig und unkompliziert möglich. Neben der Verwendung erstklassiger Qualität bei der Auswahl der Rohstoffe wie Stahl, Zink, Titan, Nickel oder Aluminium, beschäftigt Heuibin nur hervorragend ausgebildete Techniker.

Angebot 

Nicht nur in Taiwan und China, dank schneller und genauer Umsetzung der Kundenwünsche, ist Hueibin heute international bekannt. Vom Design bis zum fertigen Stanzteil, unterstützt Hueibin seine Kunden mit vollem Einsatz. Statt dem Kauf von gleichartigen, kompatiblen Ersatzteilen, kann Hueibin seinen Kunden maßgefertigte Teile anbieten, die den Originalteilen zum Bestücke ihrer Maschinen perfekt entsprechen. Einer der größten Vorteile in der Zusammenarbeit mit Hueibin ist jedoch die Flexibilität des Unternehmens bei der Herstellung von Stanzteilen und anderen Metallwaren. So können Aufträge jeder Größenordnung bearbeitet werden. Ob maßgefertigte Stanzteile für die Großindustrie, eine Kleinserie für mittelständische Unternehmen oder ein einzelnes Stanz- oder Formteil für Privatanwender, die Mitarbeiter von Heuibin machen es möglich.

Ausstattung und Reputation

Mit hoher Kundenzufriedenheit und bewährter Qualität, hat Hueibin sich seit der Gründung einen stetig wachsenden Kundenstamm gesichert. Die Stanzteile des Unternehmens werden heute international als Custom Stamping Parts und Metal Stamping Parts vertrieben. Das Label „Made in Taiwan“ sowie die Zertifizierung nach ISO 9001, haben dabei geholfen das Ansehen der Firma zusätzlich zu stärken.  Die Fertigung der Metallstanzteile und Maßanfertigungen erfolgt heute in den Hueibin Werkshallen, auf über 3000 Quadratmetern Fläche. Nach dem Umbau und Erweiterung des Geländes im Jahr 2006, wurden viele neue Maschinen für die Serienproduktion angeschafft. Zum Inventar der Firma zählen heute unter anderem Fräsen, Stanzwerkzeuge, hydraulische Pressen und Lötapparate für die Großproduktion.  Mit viel Erfahrung, den richtigen Werkzeugen und dem außerordentlichen Service ist Hueibin in der Lage, nahezu alle Kundenwünsche zeitnah und zuverlässig zu erfüllen.

Taiwan Stamping Parts New ISO

Oct. 2016 Hueibin Enterprise Corp. / Taiwan Stamping Parts of KueiShan Township, Taoyuan County in  Taiwan, R.O.C has received its new Certificate of Registration for ISO 9001: 2015 (CNS 12681) The scope of the work at Hueibin Enterprise Corp.  is the following: Stamping Parts for Automotive, Electronic and Hardware Componemts. The date of issue was Sept. 22, 2016 and it will expire on 21-Sept-2019 

If you like to know more about Hueibin Enterprise Corp. of Taiwan please visit our website at www.taiwanstampingparts.comstamping parts ISO taiwan metal stamping quality English

Stamping parts for car accessories

Stamping parts for car accessories

            Hueibin Enterprise Corporation / Taiwan Stamping Parts Company is the world’s leader in stamping parts for car accessories. For over 30 years, we have delivered quality stamped parts for a number of different car accessories. Some of these accessories include wheel covers, engine brackets, engine heat covers, shock absorber components, safety belt stands, air bag stands and many other kinds of auto accessories. Most people assume these accessories and components are all manufactured by the auto manufacturer that uses those parts. But the truth is auto manufacturers purchase many of the parts they put in their cars from metal stamping parts manufacturers like us. Automotive companies worldwide depend on our company to provide them with customized parts for their cars’ accessories in order to make them function properly.

Now you may think it would be easier to just go to any automotive supply store and pick up the parts you need for your car. But the problem with doing this is you will end up with generic auto products that won’t meet the necessary requirements to function properly in your particular car, especially if it is an older car which has outdated parts. By hiring the Hueibin Enterprise Corporation to create your custom car parts, you will ensure that you’ll receive what you need to make your cars function the right way. Of course, you don’t have to just be an individual looking to restore their old car. Many of our clients are automotive supply stores looking to stock up on their own inventory. But no matter what type of client you are, we will work with you to accommodate your needs. Our customer satisfaction is rated number one and the proof is in our ISO 9001 certification by the International Organization for Standardization.

If you visit taiwanstampingparts.com you can see the types of stamping parts that we process. You’ll also find a “Contact us” link at the top of every page. If you have any questions about our process in stamping parts for car accessories then use the email address or phone number on that contact page to reach our customer service team. They will be happy to answer any questions you may have. And if you have the specifics on the stamping parts that you need custom made for your car accessories, then please provide that information with your inquiry. That way we’ll be able to give you an accurate estimate on the price and duration to complete the project. 

You are here: Home Home News & Events